Easy way to assemble robot

Simple Robot Notes

Robot? Definitely what you guys think Robocup or film transformes are cool, but glance if we do not know anything about the world of robotics, maybe things like this look so cool and complicated course. Because at the core of its components.

Components are not you can do in vain, in addition to assembling how to make robots requires precision and special skills to be able to do it. And whether people who can not do anything, can make a robot.

Can all, as long as willing to learn and learn. Well, until now a lot of successful people who have set up tutoring or school for robot assembly, school robotics (school robot).

However, of the many robotic schools that exist, it does not become a complete or complex thing if we already know what materials we need to make it. And so many today have opened online stores.

The online store sells robotics components, you can buy them freely (no special permission required). Moreover, the purchase of robot equipment also has a guide, whether it be realized video or a guide book.

To make it, maybe you need the ingredients below. Sensors, there are 3 kinds of sensors

    First, the Sharp Sensor GP2Y0A21YK0F 10-80CM (sensor tracker based on infra red can map the environment around us). Second, BDFD-1000 sensor tracing sensor module (sound detector), Lastly, LM393 Sound Detection Snsor Module.

That's just 3, in fact there is much more about "censorship."

    Processor

This is a tool for processing all existing commands, in which this command is used to decide, based on what is captured by the above sensors. Processor can we assemble ourselves.

However, if we assemble it ourselves will have difficulty in the selection of components. For easy, help with a device called arduino board that has been provided by the company Arduino.

The tool is made complete, already installed processor "ic micro controller", this micro has been installed in board with pcb board will help integrate by way of power supply.

The process, from the sensor to the micro controller, then the data in the process, after that you decide what will be done by the robot, by way of on / off (disconnect or flow) electric current, so the motor or wheels move with the robot brain (ic micro controller )

Motorcycle

Lastly you need motor-> Generally in the form of a dynamo, the task of moving the robot forward, backward or spin. 

Know the Robot Today -Robot Avoider-

The robotik may already know close to this one robot, well this robot is called robot obstacle. This robot utilizes a sensor, and if this avoider robot hit the wall or hit the object in front of it.

Then this motor will rotate according to the circumstances of the obstacle area, when he hit the robot will turn his body to the left or right, and even backed up when the limit switch simultaneously hit the wall.

For the next Performance.Active will provide a simple way to make robots do not use the PCB system, but only utilize used items for the manufacture of robots, such as toys.

For beginners like us, this tutorial you can learn. However, we must follow the procedures and steps that have been summarized from a trusted source. Let's see the following tutorial.

Creating a Simple Robot from a Used Toy

We prepare terlebuh used toys used cars that still have part of the motor and wheels. For the body, we can use plywood or airlyc, with the reason not have much capital. 😀

Robot Car Toys We Need

 Skema from Toteboot.

The picture below is a series of PCBs, and the chain groove should be neat should not be chaotic later will be fatal. Then you can make this PCB circuit 2 times for left and right motor.

Picture the PCB circuit inside a Simple Robot that We Bua

PCB Series Looks Up from Top

PCB Series Looks Up from bottom

Materials We Need for Simple Robot Making, there are 12 kinds, namely:

    Size 20 x 20 cm for Triplek or Arcylicnya

    2 Fruit Car Remote Control to Make Robot

    5 Volt 8 pin for its Relay, If Could be 2 Units

    Limit Switch for 1 robot takes 2 Fruits

    IC Regulator 7805 brand for 1 piece

    Transitor TIP31 as much as 2 Fruits for 1 Robot

    Variable Resistor 2 Fruit

    PCB Plain which size 8 x 5 cm

    4 Fruits (Specifications or Bolts)

    Black Color for Header pin

    Capacitors and Resistors

    Finally We need Tin Cable, and 3xAA Battery with Lippo 7.4 Volt

Share this

Hendri